PDA

View Full Version : Secondary Sensors Range


regul
01-18-2012, 11:44 AM
prmSensorRange = <fRange>: Range of the primary sensors, shown in the Sensor Manager by the blue sphere.
secSensorRange = <fRange>: Range of the secondary sensors. This range is always greater than the primary sensors range. Secondary sensors are not shown in the Sensors Manager, and not all enemy ships appear in the secondary sensors range.

По примари сенсорам всё понятно, а вот секондари - по какому принципу показываются не все корабли противника, от чего это зависит и правильно ли они показываются?

Добавлено через 36 часов 20 минут
SensorDistortion
Sensor distortion multiplier. This multiplier makes ships harder (if multiplier is [0..1]) or easier (if multiplier is greater than 1) to detect by sensors. The multiplier is applied to the detectors’ sensor ranges.
VisualRange
Influences the visual range of the ship
PrimarySensorsRange
Influences the primary sensors range of the ship (the blue bubble in sensors manager)
SecondarySensorsRange
Influences the secondary sensors range of the ship (ever noticed that you can see carriers outside of the blue area? That's secondary sensors)

Rusinoff
01-26-2012, 11:43 AM
Боюсь ошибиться, но по моему это связано с хайгарским скаутом. У того есть постоянный сенсор и после изучения - новый, который на несколько секунд открывает чуть ли не всю карту. Вот он-то и показывает только большие корабли (CapShip). А вот принцип работы (скрипты) - паррдон,:(

regul
01-27-2012, 12:29 AM
Пинг показывает все корабли, и мелочь тоже. Удивительно, что скоро будет 10 лет HW2, а про дисторшен никто ничего так и не знает. Перелопатил весь реликфорум - 10 тредов и сто мнений, что это такое. Вот тут (http://forums.relicnews.com/showthread.php?264803-Secondary-sensors&p=1045335646#post1045335646) затеял очередной обмен имхами.